Powers Fasteners 8478SD-PWR AC100+GOLD Vinylester Injection Adhesive Anchor System 10 Oz.

Sale price$ 18.37 Regular price$ 22.44
In stock, ready to ship


• (1) Nozzle

• A Two-Component Adhesive Anchoring System
• Designed For Bonding Threaded Rod And Reinforcing Bar Hardware Into Drilled Holes In Concrete Base Materials
• Epoxy Is Automatically Mixed When Dispensed Through Nozzle
• Be Sure That Hole Is Properly Cleaned Of All Dust And Debris Prior To Injection Of Epoxy
• Hole Should Be Filled Approximately 2/3 With Epoxy From The Back
• Then Insert Anchoring System Or Rod While Turning To Ensure Positive Adhesive Distribution
• Allow The Epoxy To Fully Cure Prior To Applying Any Load

• Working And Curing Time Varies Drastically Depending On Base Material Temperature
• Length: 3"
• Width: 2.5"
• Height: .9"

Adhesive Anchoring System, Type Ac100+, Color Gray, Size 10 Fl. Oz., Container Type Cartridge, Mixing Ratio 10:1, Temp. Range (F) 14 To 104 Degrees, Functional Cure 15 Min. To 24 Hr., Full Cure 15 Min. To 24 Hr., Work Life 1 To 90 Min., Substrates Concrete, Application Rebar Doweling, Threaded Rod Bonding, For Use With Threaded Rod And Rebar Dowel.

You may also like

Recently viewed