Description
Powers Fasteners 7432SD1-PWR Description
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.
Powers Fasteners 7432SD1-PWR Includes
- (1) Power-Stud+ SD1 Expansion Anchor, 5/8"x4-1/2" 25/Box
- (1) Nuts and Wahser
Powers Fasteners 7432SD1-PWR Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Powers Fasteners 7432SD1-PWR Specifications
| Bit Size | 5/8" |
| Minimum Embedment | 2-3/4" |
| Thread Length | 2-3/4" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 3749 |
| 2000 PSI Concrete - Shear (lbs.) * | 6198 |
| Type | Male |
| Primary | Concrete only |
| Diameter | 5/8" |
| Length | 4-1/2" |
| Material | Carbon Steel Zinc Plated |
| Environment | Dry |
| Box Qty | 25 |
| Minimum Edge Distance | 3-1/8" |
| Maximum Fixture Thickness | 1-1/8" |
| Minimum Fixture Hole Diameter (In Place) | 7/8" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 5/8" |
| Length ID Code | G |
| Maximum Torque | 75 - 90 ft./lbs. |
| Wrench Size For Nut | 15/16" |
| Length Measurement | End to End |
WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov